STICKGOO Metal & Composite Peel and Stick Backsplash Tile Sample 1 Sheet

$11.99

Color: Faux Stone Mixed Metal Linear Blend - Beige with Metal Gold

Faux Stone Mixed Metal Linear Blend - Beige with Metal Gold
Faux Stone Mixed Metal Linear Blend - Distressed Wood with Metal Silver
Faux Stone Mixed Metal Linear Blend - Black Slate with Metal Silver
Hexagon Faux Stone Mixed Metal - Beige Marble with Metal Gold
Hexagon Faux Stone Mixed Metal - White Marble with Metal Gold
Hexagon Faux Stone Mixed Metal - Black Slate with Metal Silver
Hexagon Faux Stone Mixed Metal - Wood Texture with Metal Gold
Square Mosaic Peel and Stick Tiles - Gold
Square Mosaic Peel and Stick Tiles - Gray
Hexagon PVC Mixed Metal Mosaic Tiles - White Marble with Metal Silver
Hexagon PVC Mixed Metal Mosaic Tiles - White Marble with Metal Gold
Hexagon PVC Mixed Metal Mosaic Tiles - White Marble
2022 Herringbone Wall Tile - Grey Serpeggiante
2022 Herringbone Wall Tile - Grey Wood Grain Marble
PVC Mixed Metal Mosaic Tile Backsplash- Beige
PVC Mixed Glass Mosaic Tile Backsplash - Beige Stone Texture
PVC Mixed Glass Mosaic Tile Backsplash - Black
PVC Mixed Glass Mosaic Tile Backsplash - Calaeatta
PVC Mixed Glass Mosaic Tile Backsplash - Calacatta Golden
PVC Mixed Glass Mosaic Tile Backsplash - Carrara White
Add to Wishlist
Order in the next [totalHours] hours %M minutes to get it between and
Description

 

STICKGOO Metal & Composite Peel and Stick Backsplash Tile Sample 1 Sheet

We believe your sweet house should be comfortable, peaceful,inspiring, therefore, we sincerely hope that you can pick your favorite peel and stick wall tiles for your kitchen, bathroom, living, RV and more. 

Purchase Enough Tiles at A Time

Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.

Recommended Surface

smooth ceramic tiles backsplash, smooth glass tiles backsplash, acrylic wall panel, pained gypsum, wall linoleum, stainless metal, mirror, laminate, wallpaper (if some corners are peeling, just peel them off and install tiles over them).

Non-Recommended Surface

oily wall, brick wall, stucco wall, stone wall, unfinished wall (gypsum or plaster), unpainted plywood.

Wall & Tile Temperature

The temperature of the wall and tiles should be at least about 70°F for 12 hours before installation and 24 hours after installation. This is very important because if wall and tiles are cold, the tiles will not stick well. During the winter, the wall temperature is usually lower than room temperature so make sure that your walls are warm.

Press All Grout Lines Firmly

Make sure you press ALL grout lines firmly, and try NOT to touch the adhesive side as much as you can.

Use Extra Spray Adhesive or Super Glue

The tile need to be installed over clean and sleek surface. Please note that rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install; NOT all the latex/repainted walls can be installed directly, for latex or repainted wall, the 3M Spray Adhesive is recommended.

Install

How to Install Peel and Stick Backsplash Tile

Congratulations you are about to start your decorating project, before your project begins, please take a few minutes to read the installation instructions below to make the installation process as easy as possible.

What You'll Need

• An all-purpose wall cleaner
• A small towel or cloth
• A sharp scissors or craft knife
• A Pencil or a chalk
• A ruler

1. Clean the surface

Clean up stains and powder on the wall as an essential prep step, always clean your backsplash area to remove grease and any other residue. After the area gets dry, you can start working.

2. Measure The Wall

To ensure proper alignment of your peel and stick tiles, use a pencil or chalk to mark your guide line to indicate where your tiles will be placed.

3. Cut The Tile

To create a straight edge, place the tile on your cutting mat. Use your box cutter and ruler as your guide to cut a straight line.  and the cutting method depends on the tile material. For example, simple scissors will cut vinyl tile, while harder materials can require a utility knife.

4. Peel, stick and Press

Simply fold back half of the protective backing of your peel and stick tiles. Make sure you don’t touch the adhesive portion. Align the adhesive portion with the guide lines you drew earlier and press down to ensure a good attachment.

Important Tips 

  • Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
  • Use a level or chalk line to create at least one vertical and one horizontal reference lines to guide tile placement.
  • Reinforce with a laminated roller after installation.
  • Recommend to use tile trim and caulk (or glass glue) if contact with water.
  • For rough surfaces and heavily textured walls, please follow the instructions:

1.Sand the surface with sander or spackling paste

2.Clean the wall with a damp cloth

3.Wait until the wall is totally dry

3.Spray the adhesive more on the joint area on both wall and tiles

Video Install Guide

 

Calculator

Area Calculator

Length(ft): Breadth(ft):

The total surface to cover is:{{(Length*Breadth)}}sqft

Note: Please measure the coverage area to determine the number of tiles required and consider 3-5% cutting loss.