Vamos Tile Herringbone Peel and Stick Backsplash Tile - Statuario White

$54.99
How much sq.ft. do you need?
ft2
Coverage Area Per Box of 10 Sheets: 9.4
Add to Wishlist
Order in the next [totalHours] hours %M minutes to get it between and
Description

About Backsplash: Enhance the look of your kitchen or bathroom with Vamos Tile Herringbone Peel and Stick Backsplash Tile. The durable and easy to install tile features a sleek herringbone pattern, offering a modern yet timeless touch to any space. Transform your home effortlessly with this elegant and practical solution.

Key Features

  • Herringbone Backsplash: The peel and stick backsplash is made of stone composite material, colorfast, scratch-resistant and easy to maintain. 10 sheets kitchen backsplash tiles, each 11.5"x13"x0.12", cover approximately 8.4 square feet. It is recommended that you purchase at least a 10% oversize to account for design cuts and patterns.
  • Easy to Install and Maintain: The micro beveled edges design of statuario whtite chips makes installation easier, looks better and is easier to maintain and clean.And just peel, interlock and stick. No need to overlap, no grout and no mess, save your time and money on labor. Cuts easily with a sharp utility knife or heavy-duty scissors.
  • High Quality: The peel and stick tiles are made of PVC composite laminate, waterproof, oil-proof, heat-resistant, protect the wall from oil splashes. The smooth surface is easy to wipe and remove stains.
  • Strong Adhesive : Thicker and Stronger backing glue than ordinary vinyl peel and stick backsplash for kitchen,can be easily installed over existing ceramic tiles or other smooth surface,such as PVC,glass,metal,wood,cement wall,painted wall,etc.
  • Widely Use: The newly backsplash tile for kitchen peel and stick is very suitable for home decoration, suitable for kitchen, bathroom wall, fireplace, laundry wall, decorative wall, living room wall and other places. Permanently upgrade your space and give your home a new look.

Detail:

Note:

  • Recommended Surface: Smooth ceramic tiles backsplash, smooth glass tiles backsplash, acrylic wall panel, pained gypsum, wall linoleum, stainless metal, mirror, laminate, wallpaper.
  • Non-Recommended Surface: Oily wall, brick wall, stucco wall, stone wall, unfinished wall (gypsum or plaster), unpainted plywood.
  • Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
  • Use a level or chalk line to create at least one vertical and one horizontal reference lines to guide tile placement.
  • Reinforce with a laminated roller after installation.
  • Recommend to use tile trim and caulk (or glass glue) if contact with water.
  • The new painting walls need to dry for 3 weeks, make sure the wall is completely dry and dust-free.
  • For rough surfaces and heavy textured walls, please follow the instruction:
  1. Sand the surface with sanding paper or spackling paste
  2. Clean the wall with damp cloth
  3. Wait unitl the wall is totally dry
  4. Spray the adhesive more on the joint area on both wall and tiles
Install

How to Install Peel and Stick Backsplash Tile

Congratulations you are about to start your decorating project, before your project begins, please take a few minutes to read the installation instructions below to make the installation process as easy as possible.

What You'll Need

• An all-purpose wall cleaner
• A small towel or cloth
• A sharp scissors or craft knife
• A Pencil or a chalk
• A ruler

1. Clean the surface

Clean up stains and powder on the wall as an essential prep step, always clean your backsplash area to remove grease and any other residue. After the area gets dry, you can start working.

2. Measure The Wall

To ensure proper alignment of your peel and stick tiles, use a pencil or chalk to mark your guide line to indicate where your tiles will be placed.

3. Cut The Tile

To create a straight edge, place the tile on your cutting mat. Use your box cutter and ruler as your guide to cut a straight line.  and the cutting method depends on the tile material. For example, simple scissors will cut vinyl tile, while harder materials can require a utility knife.

4. Peel, stick and Press

Simply fold back half of the protective backing of your peel and stick tiles. Make sure you don’t touch the adhesive portion. Align the adhesive portion with the guide lines you drew earlier and press down to ensure a good attachment.

Important Tips 

  • Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
  • Use a level or chalk line to create at least one vertical and one horizontal reference lines to guide tile placement.
  • Reinforce with a laminated roller after installation.
  • Recommend to use tile trim and caulk (or glass glue) if contact with water.
  • For rough surfaces and heavily textured walls, please follow the instructions:

1.Sand the surface with sander or spackling paste

2.Clean the wall with a damp cloth

3.Wait until the wall is totally dry

3.Spray the adhesive more on the joint area on both wall and tiles

Video Install Guide

 

Calculator

Area Calculator

Length(ft): Breadth(ft):

The total surface to cover is:{{(Length*Breadth)}}sqft

Note: Please measure the coverage area to determine the number of tiles required and consider 3-5% cutting loss.