Blend Tiles Peel and Stick Tile Backsplash - Gray

$49.99 $41.99
How much sq.ft. do you need?
ft2
Coverage Area Per Box: 10.0
Add to Wishlist
Order in the next [totalHours] hours %M minutes to get it between and
Description

About STICKGOO:STICKGOO is a leading & professional brand specializing in 3D-gel tile. We have a dedicated design team and a factory with advanced production technology. We are committed to providing customers with a variety of high-quality and cost-effective products. The products you receive are shipped directly from the factory, saving you the agio earned by dealers.

Key Features

  • 🌹2-3 Times Thickness: Much thicker than ordinary peel & stick tile, 2mm-2.5mm each, durable and solid tile, unlike soft sticker tiles
  • ❁Stronger Upgrade Adhesive: 3X Stronger backing glue than ordinary vinyl backsplash tile, not only stick firmly to the smooth & clean surface, but also available on lightly textured wall
  • ✿1.4 Times Coverage Area: 10 sheets thickened self-adhesive tiles, 12" X 12" each, which covers 40% more area than 10"x10" tile
  • ❃Waterproof & Heat Resistant: Widely used in kitchen island walls, bathroom backsplash, shower, fireplace, and installed behind the stove
  • ❀Easy Do It Yourself: Just peel, interlock and stick. No need to overlap, no grout and no mess, save your time and money on labor

Detail:

Note:

  • Please measure the coverage area to determine the number of tiles required and consider 3-5% cutting loss.
  • Use a level or chalk line to creat at least one vertical and one horizontal reference lines to guide tile placement.
  • Reinforce with laminated roller after installation.
  • It is recommended to use tile trim and caulk (or glass glue) if contact with water.
  • The new painting wall need to dry for 3 weeks before install peel and stick tile.
  • For rough surfaces and heavy textured walls, please follow the instruction:
  1. Sand the surface with sanding paper or spackling paste
  2. Clean the wall with damp cloth
  3. Wait unitl the wall is totally dry
  4. Spray the adhesive more on the joint area on both wall and tiles
Install

How to Install Peel and Stick Backsplash Tile

Congratulations you are about to start your decorating project, before your project begins, please take a few minutes to read the installation instructions below to make the installation process as easy as possible.

What You'll Need

• An all-purpose wall cleaner
• A small towel or cloth
• A sharp scissors or craft knife
• A Pencil or a chalk
• A ruler

1. Clean the surface

Clean up stains and powder on the wall as an essential prep step, always clean your backsplash area to remove grease and any other residue. After the area gets dry, you can start working.

2. Measure The Wall

To ensure proper alignment of your peel and stick tiles, use a pencil or chalk to mark your guide line to indicate where your tiles will be placed.

3. Cut The Tile

To create a straight edge, place the tile on your cutting mat. Use your box cutter and ruler as your guide to cut a straight line.  and the cutting method depends on the tile material. For example, simple scissors will cut vinyl tile, while harder materials can require a utility knife.

4. Peel, stick and Press

Simply fold back half of the protective backing of your peel and stick tiles. Make sure you don’t touch the adhesive portion. Align the adhesive portion with the guide lines you drew earlier and press down to ensure a good attachment.

Important Tips 

  • Please consider 3-5% cutting loss and purchase enough tiles at a time to make sure they come from the same batch to avoid slight color difference.
  • Use a level or chalk line to create at least one vertical and one horizontal reference lines to guide tile placement.
  • Reinforce with a laminated roller after installation.
  • Recommend to use tile trim and caulk (or glass glue) if contact with water.
  • For rough surfaces and heavily textured walls, please follow the instructions:

1.Sand the surface with sander or spackling paste

2.Clean the wall with a damp cloth

3.Wait until the wall is totally dry

3.Spray the adhesive more on the joint area on both wall and tiles

Video Install Guide

 

Calculator

Area Calculator

Length(ft): Breadth(ft):

The total surface to cover is:{{(Length*Breadth)}}sqft

Note: Please measure the coverage area to determine the number of tiles required and consider 3-5% cutting loss.